Obtained by diazotization and substitution of p-toluidine. First, add the sulfuric acid aqueous solution to the crushed p-toluidine while it is hot, cool it to 5 ℃, and slowly add the sodium nitrite aqueous solution until the starch potassium iodide test paper turns blue. Then add a small amount of urea to destroy excess sodium nitrite. Add the synthesized cuprous bromide to hydrobromic acid, heat to boiling, then slowly add the diazonium salt mentioned above and distill it until no oil is produced. Wash, dry, filter, distill at atmospheric pressure, and collect the 183-185 ℃ fraction to obtain the finished product. The cuprous bromide hydrobromic acid solution can be prepared by heating and refluxing a mixture of copper sulfate, copper shavings, sodium bromide dihydrate, concentrated sulfuric acid, and water for 3-4 hours until the solution turns light yellow, which is the cuprous bromide hydrobromic acid solution.
